|
The single stage regulator has to be installed in compliance with state or federal laws and with NFPA58. It is designed to supply gas appliances functioning at pressure equal to or higher than 0.5 PSI. This regulator will be consequently connected to gas appliances through high pressure flexible hoses. The outlet fitting may be at 90° or 180° in comparison with inlet fitting. Zinc die casting. Outlet: 1/4” FNPT at 90° or 180°, single barb at 90°. Inlet: 1/4” FNPT. Outlet pressure: 9 or 10 or 15 or 16 PSI. Setting point: 11 WC+/-1 WC; 35,000 BTU/h. Inlet pressure: 25-250 PSI. Temperature of functioning: -4 °F/122°F (-20 °C/ 50 °C)
|
- Designed to supply gas appliances functioning at pressure equal to or higher than 0.5 PSI
- Inlet: 1/4" FNPT, Outlet: 1/4” FNPT at 90° or 180°, single barb at 90°, Outlet pressure: 9 or 10 or 15 or 16 PSI, Setting point: 11 WC+/-1 WC; 35,000 BTU/h, Inlet pressure: 25-250 PSI
- Great for high pressure appliances like smokers, turkey fryers, heaters, and stoves
- For outdoor use only
|